Glassivation

  

Glassivation is a semiconductor wafer fabrication process that involves the deposition of the final passivating layer on top of the die to protect the die from mechanical damage and corrosion.   As the name implies, this final layer is often composed of an amorphous insulating material, or glass.

    

Silicon nitride (Si3N4) is a common glassivating material because of its suitability for this purpose.  Highly resistant to diffusion, it is almost impenetrable to moisture and ionic contaminants such as sodium (Na).  It can also be deposited with a low residual compressive stress, making it less prone to delamination or cracking.  Its interfacing with the underlying metal layers is also very conformal.  Finally, it can be prepared with very low pinhole density.  Since silicon nitride has a high dielectric constant, it is not popular as an interlayer dielectric for the simple reason that it results in a high inter-metal capacitance.

    

Silicon nitride can be deposited using plasma-enhanced chemical vapor deposition (PECVD) or low-pressure chemical vapor deposition (LPCVD), although the former is the technique of choice for glassivation purposes because it allows a lower processing temperature.

    

   

Figure 1.  Example of an LPCVD system that can

be used to deposit silicon nitride on substrates

    

   

Wafer Fab Links:  Incoming Wafers Epitaxy Diffusion Ion Implant Polysilicon

Dielectric Lithography/Etch Thin Films Metallization Glassivation Probe/Trim

 

See Also:  Dielectric SiO2, Si3N4 Properties; IC ManufacturingWafer Fab Equipment

   

HOME

      

Copyright 2001-2006 www.SiliconFarEast.com. All Rights Reserved.